Recent content by gixxy

initially it was the right side but the other side followed not much later, and it seems to alternate currently. i live atop a very steep hill; and while descending it i hit the front brakes repeatedly to pump the forks, and i find no residue . but when i do some higher speeds on the highway...

does anyone know if an 05 06 1000 front axle is interchangable with a 600 or 750?

my 06 1000 had developed a minor oil residue ring on the tubes at about 25000 miles. i was able to remedy it with at first seal mate which i upgraded to seal doctor .now at over 31000 miles the problem returns. if i clean the seals now i can achieve what seams to be a successful reseat of the...

i replace my coolant usually every four years. in my clymers manual it states you should bleed at the thermostat housing on an 06 1000. i was wondering how many fellow owners do this step as it is not so easily accessed. my local dealer says they just rock the bike and snap the throttle and...

after most rides i like to due a quick wipe down of my k6 1000. i always have the toughest time with the area behind the motor where youve got the rear suspension and related linkages as well as that yellow coil over spring. i try to minimize any fairing removal unless absolutely necessary for...

my 06 1000 came with that black coating on the fork sliders which im assuming is DLC but might be TiN,not sure. ive heard of other owners cleaning with either brakeclean or some with contact cleaner ; not sure which if either would be safest.

recently noticed minor oil film on my left fork leg. my 06 1000 has that black anti stiction coating which makes it tougher to see . ive seen and heard about motion pros seal mate and gave it a try. seems the best i can achieve is no leak unless i ride for more than 20 min ; then i notice fillm...

wondering how often fellow k6 1000 owners change plugs and what preferances for plugs.

i want to replace the dust seals on my 06 gixxer 1000 steering damper. do i have to remove the nose plastics? it seems i can access the bolts without touching any plastics . anybody dealt with this ? any comments appreciated

ive never adjusted my fork settings from stock; but im curious how i might improve it for my riding style. ive always felt the front felt too stiff', yet i only weigh about 130lbs. i live and ride on rural country roads and seldom due track days anymore,suggestions?

have several maintenance projects lined up ; coolant change , spark plugs ,etc., and figure rather than removing fairings each time maybe just leave them off till i get around to all of it. this way i could continue using the bike and not have to go through this procedure each time. id just be...

recently heard about a so called good forever anti- freeze / coolant. anybody know of such a thing?

curious what gears you guys favor when obeying posted speeds. ive got an 06 1000 ; oftentimes in and around town i t ry to stay within limits,but dont want to lug engine. in a 30 zone do you favor 2nd ? or how about 45 or55 mph zones?

i recently adjusted my pedal to a much better hight for me by loosening the lock nuts and turning the threaded rod. ive seen posts and videos recommending doing this. what bothers me is that my clymers gives a specific range to keep the adj. within; not going below 2.30".WHY?? dont aftermarket...

i notice on the really hottest days if i ride my 06 1000 to work or even just to the store; if i cant find a shady spot and the bike sits in the direct sun for a time ,it sometimes wont start on my first attempt . usually on my second hit of the button she starts right up. this dosnt always...