Hi newby here ive got a gsxr 1000k1 i took the tank off to do a repair due to some cosmetic damage i also took out the fuel pump so as not to get any paint on it when i spayed the tank when i put it back the bike wouldnt start i eventualy found the fault it was the kill switch which i have now bypassed. Now my problem is the bike is very lumpy at 3 4 k its that bad i have to slip the clutch and try to give it a handfull when pulling away once under way if i nail the throttle it pulls very slowly and bogs down if i back off the throttle slightly from full throttle it starts to pick up and rev round to about 11k i have no fault lights changed the plugs and filters cleaned out the fuel pump any help would be really appreciated